Elevated Dog Beds For Large Dogs – There are many advantages in providing a raised bed for your dog. With the bed elevated, your dog will be protected from extreme temperatures that may exist at ground level. Luckily, it is simple and affordable to build your own high PVC dog bed. PVC is a pipe plastic that is durable, economical and requires little effort or the ability to cut and secure. PVC can be used to make a wide variety of simple structures like raised dog beds. Calculate the width, length, and height of the bed should be to accommodate your dog since many large dogs will feel comfortable in a bed about 32 inches long and 28 inches wide. Smaller dogs could use considerably less space.
Keep in mind the height being about 3 to 6 inches from the ground. Measure and cut the PVC pipe with a saw to fit the dimensions that are determined for the elevated dog beds for large dogs. Remember that PVC fittings will add length. You will need four stretches of the tube for the bed frame and another four for the legs. Connect the tubing to three-way corner pieces. The tube must slide to the right at the female ends of the accessories. Insert the cut ends of the bed legs into the connections. When mounted, place the bed on the floor to check if it is level. Remove any excess length from the individual legs to make the bed as level as possible.
12 Photos Gallery of: PVC Elevated Dog Beds For Large Dogs
Trim the fabric to fit the elevated dog beds for large dogs frame. The fabric is then pushed over the top of the frame and secured by screws at the bottom. Leave an extra inch, which folds low to hide the edges of the material. The fabric should be several inches longer than the dimensions of your frame. Fold the last inch of fabric under one side to hide the cutting edge. Pull the fabric over the PVC pipe. From a half-inch of the connection, secure the fabric to the bottom of the PVC pipe with screws.