Making Raised Dog Bed with Stairs
Raised dog bed with stairs – It’s easy to make a dog bed with PVC pipes. PVC as well as a cost-effective alternative does not require complicated tools. This process can be done in less than an hour and gives your dog a comfortable place to rest. This article shows you how to make a dog bed with PVC pipes. Determine the length of PVC pages. Add 24 inches to the four 6-inch legs so that you can work with 96 inches. Try to keep the sides around or below 25 inches to avoid deforming the PVC and let the bed sags. Good lengths would be 25 inches and 20 inches. This leaves an extra 6 inches to discard or find a different use. Cut the PVC pipe. It measures two lengths of 20 inches, two lengths of 25 inches and four lengths of six inches. Make sure that the cuts on the 6-inch sides are straight because they serve as legs to keep the bed on the floor. A saw can cut the PVC, but if you have a table saw, it will make it easier.
Build the frame of your raised dog bed with stairs. Connect the 25-inch section to two of the corner pieces. Do the same thing with the other 25-inch section and the remaining corners. Then, connect the 20-inch section with two corner sections, one for each 25-inch section. Then, you insert the legs into the remaining openings in the corner pieces and make sure the corner pieces are properly connected so that the legs are pointing down. Use a rubber hammer to secure all connections.
12 Photos Gallery of: Making Raised Dog Bed with Stairs
To build raised dog bed with stairs and help him climb in comfort and style to share the morning hug. Measure the length from the floor to the top of your bed. This will be the height of the ladder. Measure the length of your dog’s legs and how high you can comfortably step. A good rule is that the height of the steps is no more than the length of the legs. Measure the width and overall size of your body. Assemble the panels until they reach the height of the measured ladder. Mark the width of your dog on the panels, add 2 inches to make the ladder with comfortable width so your friend has room to climb and turn around.