Dog Bed Made from End Table – If you want to give your dog a comfortable bed so you can sleep, build it using an old end table. You will enjoy being close to you in your own safe space and everyone will have a good night’s rest.
Before turning an end table into a bed, you have to do it to know if it will fit inside of it once you are done. Dogs can take up more space than you can imagine, so you should not measure it with the naked eye, aid it from a tape measure and take the measurements correctly. When you have taken the measurements of your dog correctly, you will see that only a small dog will fit inside the end table. The standard size of a bed for a small dog is 19 by 24 inches or 30 inches if it is round, just right for a rectangular or octagonal table. Any table that has dimensions below these in the interior, is very probable you will not be able to use it as dog bed made from end table without making him considerable modifications.
12 Photos Gallery of: Dog Bed Made from End Table Ideas
Remove the drawers or partitions from the inside of the end table and remove the nails, screws or other sharp objects you have. Remove the door and hinges to prevent accidentally your dog can stay in or out when you want to take a nap. Consider making ventilation holes on the sides and back. Fill other holes and cavities with wood putty, sand rough areas and wipe off dust with a cloth before giving the inside a non-toxic, washable enamel coating.
Finish the dog bed made from end table project by putting the upholstery. You can use a commercial bed if your end table is close to the size of a bed for a standard dog or you can put a pillow that suits you. If you prefer to make one, cut a cardboard pattern using the measures that the end table has on the inside. Adjust the pattern until it fits perfectly, then use a cardboard as a guide to cut two pieces of fabric, you must add a half-inch around the outline for when you sew it.