PVC dog bed – A dog pen is a good investment if you want to let your dog have their own place to run around and play. Unfortunately, it is not always possible to let your dog run freely. Most people who invest in either of these do not have a large farm or do not have a fence. Dogs are of course friendly and curious, but nature can also make them get lost or get hurt. You can build a playpen for your dog so it has the space it needs to work out and relax in the knowledge that your dog will not end up in trouble or pain.
Cut PVC dog bed in 12 segments, each 6 meters in length. Assemble four pieces of PVC pipe together with corner joints that have three sockets. This will form a square, which is the bottom layer of the pen. Mount the pen in the same way. Attach four vertical pieces to the corner joints in the bottom layer of the pen. Place the top layer under the 4 vertical pieces and attach to the corner joints. Prepare PVC for bonding. Use PVC cleaner to prepare PVC for assembly. Clean about 1 cm at each end of each piece of PVC and the inside of each elbow.
12 Photos Gallery of: DIY PVC Dog Bed Ideas
Apply PVC dog bed glue to the ends of each tube and the inside of the corner. PVC glue dries quickly. Make sure your connections are properly adjusted because you will not be able to adjust them after the glue has dried. Attach nets around the sides of the pen with a thin line. Tie the rope to the frame and weave through the edges of the net. Now, you have DIY PVC bed for your lovely dog. You can places that bed in interior or outdoor.