Canvas dog bed – Did you know that with a tarpaulin you can make a durable bed for your dog? The canvas is a tough fabric and most can be cleaned easily. Carefully cut the fabric and trim the edges to make a durable bed for your dog using a tarpaulin. The type of canvas you choose will be key so your dog can adapt well to his new bed. Plain cotton canvases absorb a lot of moisture and trap soil particles. It is best to look for a canvas made of treated skin. The treated skin has a stain resistant coating and a waterproof coating. These coatings make your dog’s bed easy to clean and keep in good condition.
Use sharp scissors to cut the edges of the canvas dog bed. Measure the length and height of your dog, and then add 4 inches to each dimension to get a cut size appropriate to the dimensions of the dog. Use a pencil to mark the dimensions on the canvas and draw two pieces. Then cut the pieces carefully and prevent the edges from fraying. Sewing is the main step that determines the length of a canvas bed for a dog. Finish the edges of the two pieces with a tightly tightened enzyme. Use a straight stitch to sew the two pieces leaving a 1-foot gap in both, and then pull the canvas through the opening to put the piece to the right.
12 Photos Gallery of: Learn More to Choose Best Canvas Dog Bed
Fill the bed with soft foam or old pillows. Leave it inch across the outer edge to close the gap and create a beautiful finish. When the canvas dog bed becomes dirty, pour approximately ¼ lid of liquid detergent into a container and add about one gallon of warm water. Take a brush and gently rub the detergent on the canvas surface. Allow detergent to penetrate for about 15 minutes to remove impurities and odor. Rub the surface again and then rinse with clean water. Let the bed dry in the open air.