A dog teepee bed is an Indian type of protection. Indians would light a fire inside to keep warm, for this reason a teepee has an opening at the top, to let the smoke out. These days, these con-formal structures are used for dog bed. Homemade tipi must be large enough to be sure to start a dog inside. Dog like enjoy hanging out under this teepee. Teepees are decorated in natural style patterns. To make dog teepee bed first instructions is take three posts and place them on the floor. Take some ropes and tie the poles together just outside the top so that they can form a tripod. Leave the rope hanging from the top.
Next steps to make dog teepee bed tilt the poles on the frame structure that you have done. Use the rope hanging from the top of the tripod to tie all the poles together. Take the fabric for the cover and a tape measure. Mark a semi-circle with a double-width diameter. For example, if the fabric is 8 feet wide, make a 30-foot semicircle. Make a cut in the middle of the half circle for smoke flaps. Cut out half circles at both ends of the weave to form a round opening when the semicircle is connected.
12 Photos Gallery of: How To Make Dog Teepee Bed
Next steps to make dog teepee bed cut out holes along the edge of the semicircle. Take a rope and drive it through these holes. Attach the rope to the top; this will help when setting up the lid. Take the lid and hang it around the frame. Attach the lid to the studs on the top. Take wooden plugs and insert them through the holes along the underside of the lid in the ground. Gently drive over the poles with your hands to make sure there is nothing that can tear the teepee tent cover.